The Super Node Hospitality Demo Kit showcases the integration of Lights, Shades, Fans and Door locks with sensors and wall controls. The devices can be operated independently which demonstrates the flexibility of configuring the Super Node for numerous applications.
Wiring
A single Super Node powers a 12V Fan, Door Lock, 2 Lights, and drives a Shade Motor. A relay is used to change the direction of the shade movement. The shade is controlled from a 4 Button Wall Switch to full open or close the shade or jog it up or down. The two Lights are controlled by either a Light Sensor for Daylight Harvests and a 4 Button Motion Wall Switch. The Door Lock is unlocked using NFC Finger Print and QR Code Access controlled. The Fan turns on with proximity to a Distance Sensor. A 30W PoE injector powers the Super Node.
Control Narrative
The Super Node execute the control narrative for each device based on signals from the sensors and wall controls.
1. Fan - when proximity is detected turn on the fan. Turn it off otherwise.
2. Lock - unlock the door when access is granted. Lock it otherwise.
3. Motion Light - turn on the light when motion is detected. Turn off the light otherwise.
4. Daylight Light - turn on the light when ambient light is low. Turn off the light otherwise.
5. Shade - open shade with On button, close shade with Off button, jog shade while holding Up or Down buttons
Components
The bill of materials includes the MHT Super Node, 30W Injector and various 12V devices. The Wall Controls and Sensors are provided by Nexgen Sensors.
- Super Node - MHTi-SUPERNODE
- 12V Fan
- 12V Door Lock
- 2 12V Lights
- 12V Shade Motor
- 12V Relay
- NS111 Light Sensor
- NS118 Distance Sensor
- NS411 NFC+Fingerprint Access Control
- NS412 NFC+QR Code Access Control
- NS216 4 Button Motion Wall Switch
- NS214 4 Button Wall Switch
- 30W PoE Injector