Brad Oraw
- Total activity 42
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 21
Articles
Recent activity by Brad Oraw-
MHT RS485 and 0-10V Occupancy Sensor and Node 90
MHT Inspextor Node 90 supports both RS485 and 0-10V sensors. This include the NS311 Thermal Occupancy sensor which has a primary RS485 data interface but also a programmable 0-10V analog output. In...
-
MHT O3-EDGE Sensor Node 90
Integrate Delta Controls’ O3 Edge with MHT Inspextor Node 90 PoE infrastructure. The O3 Edge is a standalone multisensor that uses sensor fusion technology to deliver the most accurate view of an i...
-
UPS Emergency Lighting Control
The Centralized Emergency Lighting Bypass differentiates between emergency and normal operation mode by monitoring power. During normal operation, the inspeXtor server is online and emergency light...
-
MHT Super Node AT Tuneable White and RGBW
The Super Node can drive two RGBW light fixtures or four AT tuneable white lights. There are two power groups channels 1 to 4 and channels 5 to 8. These power groups have a common positive termina...
-
Cisco Advanced Demo Case with Monitor
Overview The MHTi-Cisco Advanced Demo Kit V2 demonstrates advanced lighting control capabilitiesutilizing 1x NS111 light sensor, 1x 7B wall switch, one 90W Constant Current (CC) MHT Node, 2xAutotun...
-
MHT RS485 Sensors and Node 90
MHT Node 90 is well known for driving and controlling DC loads from Power Over Ethernet infrastructure. However, it also can interface with RS485 devices such as sensors. RS485 sensors often provid...
-
MHT Super Node Hospitality Demo Kit
The Super Node Hospitality Demo Kit showcases the integration of Lights, Shades, Fans and Door locks with sensors and wall controls. The devices can be operated independently which demonstrates the...
-
MHT Super Node Demo Kit
The Super Node Demo Kit showcases the integration of Lights and Shades with a common Wall Plate control. The shades and lights can be operated independently which demonstrates the flexibility of co...
-
MHTi-EM Battery Backup Usage
The MHTi-EM device is a CC driver with internal battery that can drive a load at 8W for 90 minutes. The battery is recharged during normal use. Connect the battery back device to one of the output ...
-
Shade Automation Control
The Shade Control System is designed to automate window shades based on environmental conditions to maintain optimal indoor lighting levels, minimize heat gain, and improve energy efficiency. The s...